SER or SEU
|
|
APPLICATIONS (suitable for use as follows :) |
|
● Joysense Type SE, service entrance cable is used to convey power form the service drop to the meter base and from the meter base to the distribution panelboard; however, it may be used in all applications where Type SE cable is permitted ● SE cable may be used in wet or dry locations at temperatures not to exceed 90℃ ● Voltage rating is 600V |
|
|
STANDARDS&FEFERENCES |
|
|
Joysense Type SE cable meets or exceeds UL Standard 44 for Type XHHW-2 conductors UL Standard 854, Federal Specification A-A 59544, and requirements of the NEC®. |
|
|
CONSTRUCTION |
|
|
Joysense Type SE cable is construted with sunlight resistant Type XHHW-2 conductors or Type THWN conductors. Aluminum conductors are AA-8000 series Aluminum Alloy, compact stranded. Joysense Type SE, Style R Cable assembly plus reinforcement tape are jacketed with gray sunlight resistant polyvinyl chloride (PVC). Available as 2 conductor (2 insulated phase conductors, bare ground), 3conductor (2 insulated phase conductors, insulated neutral, bare equipment ground), or 4 conductor (3 insulated phase conducted, insulated neutral, bare equipement ground). Type SE, Style U Cable assembly plus an overall concentrically applied neutral and reinforcement tape are jacketed with gray sunlight resistant polyvinyl choloride (PVC). |
|
|
SPECIFICATIONS |
|
|
● SER Sample Specification: Cable shall be UL-listed Type SE, Style R, suitable for operation at 600V or less as specified in the NEC®. Conductors shall be Aluminum Alloy, weather resistant PVC jacketed, as manufactured by Joysense Company. ● SEU Sample Specification: Cable shall be UL-listed Type SE, Style U, suitable for operation at 600V or less as specified in the NEC®. Conductors shall be Aluminum Alloy, weather resistant PVC jacketed, as manufactured by Joysense Company. |
|
WEIGHTS,MEASUREMENTS AND PACKAGING |
||||||
|
CONDUCTOR SIZE/CONSTRUCTION (AWG or kcmil) |
NOMINAL O.D.(mils) |
ALLOWABLE AMPACITIES” |
APPROXIMATE NET WEIGHT PER 1000ft(lbs) |
|||
|
60℃ |
75℃ |
90℃ |
DWELLING |
|||
|
SER ALUMINUM TOW CONDUCTOR WITH BARE GROUND (FORMERLY REFERRED TO AS “EZ-SE” ) |
||||||
|
6-6-6 |
650 |
40 |
50 |
60 |
- |
150 |
|
4-4-4 |
745 |
55 |
65 |
75 |
- |
203 |
|
4-4-6 |
745 |
55 |
65 |
75 |
- |
203 |
|
2-2-2 |
864 |
75 |
90 |
100 |
100 |
290 |
|
2-2-4 |
864 |
75 |
90 |
100 |
100 |
290 |
|
2/0-2/0-1 |
1140 |
115 |
135 |
150 |
150 |
527 |
|
2/0-2/0-2/0 |
1140 |
115 |
135 |
150 |
150 |
527 |
|
4/0-4/0-2/0 |
1354 |
150 |
180 |
205 |
200 |
784 |
|
4/0-4/0-4/0 |
1354 |
150 |
180 |
205 |
200 |
784 |
|
SER THREE CONDUCTOR WITH BARE GROUND (GORMERLY REFERRED TO AS “FOUR CONDUCTOR” ) |
||||||
|
8-8-8-8 |
612 |
30 |
40 |
45 |
- |
136 |
|
6-6-6-6 |
717 |
40 |
50 |
60 |
- |
196 |
|
4-4-4-6 |
823 |
55 |
65 |
75 |
- |
252 |
|
2-2-2-4 |
956 |
75 |
90 |
100 |
100 |
359 |
|
1-1-1-3 |
1079 |
85 |
100 |
115 |
110 |
449 |
|
1/0-1/0-1/0-2 |
1168 |
100 |
120 |
135 |
125 |
540 |
|
2/0-2/0-2/0-1 |
1264 |
115 |
135 |
150 |
150 |
653 |
|
3/0-3/0-3/0-1/0 |
1378 |
130 |
155 |
175 |
175 |
793 |
|
4/0-4/0-4/0-2/0 |
1503 |
150 |
180 |
205 |
200 |
968 |
|
250-250-250-3/0 |
1576 |
170 |
205 |
230 |
225 |
- |
|
SER FOUR CONDUCTOR WITH BARE GROUND (FORMERLY REFERRED TO AS “FIVE CONDUCTOR” 452) |
||||||
|
2-2-2-2-4 |
1059 |
75 |
90 |
100 |
100 |
452 |
|
2/0-2/0-2/0-2/0-1 |
1404 |
115 |
135 |
150 |
150 |
827 |
|
4/0-4/0-4/0-4/0-2/0 |
1672 |
150 |
180 |
205 |
200 |
1228 |
|
250-250-250-250-3/0 |
1847 |
170 |
205 |
230 |
225 |
- |
|
SEU TWO CONDUCTOR WITH A BARE CONCENTRIC GROUND (FORMERLY REFERRED TO AS “THREE CONDUCTOR” ) |
||||||
|
6-6-6 |
430×687 |
40 |
50 |
60 |
- |
145 |
|
4-4-4 |
499×800 |
55 |
65 |
75 |
- |
198 |
|
4-4-6 |
474×775 |
55 |
65 |
75 |
- |
181 |
|
2-2-2 |
569×925 |
75 |
90 |
100 |
100 |
283 |
|
2-2-4 |
554×910 |
75 |
90 |
100 |
100 |
259 |
|
2/0-2/0-2/0 |
736×1221 |
115 |
135 |
150 |
150 |
514 |
|
2/0-2/0-1 |
720×1205 |
115 |
135 |
150 |
150 |
468 |
|
4/0-4/0-4/0 |
878×1462 |
150 |
180 |
205 |
200 |
765 |
|
4/0-4/0-2/0 |
835×1419 |
150 |
180 |
205 |
200 |
691 |
|
Allowable Ampacites: 60℃-When terminated to equipment for circuits rated 100 amperes or less or marked for 14 through 1 AWG conductors. 75℃-When terminated to equipment for circuits rated over 100 amperes or marked for conductors larger than 1 AWG. Dweling –For units. Condutors shall be permitted at listed ampacitees as 120/240 volt, 3-wire, single-phase services and feeders. All conductors are compact stranded construction comdlying with UL standard 44. |
||||||
